No products in the cart.
Adhesive Lined Tube 24-6mm x 110mm 10 pieces
GANAH-TA24-6-10-110L
"Seal and protect joins from moisture and against the natural elements using quality Adhesive Lined Heat Shrink Tubes.
- High density and durable, Crosslinked Polyolefin
- Length 110mm
- Heat shrink start size 24mm - 6mm finish size
- 10 pieces per bag
Refer to the General Technical Guides section on Technical Resources page for Heat Shrink guides."
- High density and durable, Crosslinked Polyolefin
- Length 110mm
- Heat shrink start size 24mm - 6mm finish size
- 10 pieces per bag
Refer to the General Technical Guides section on Technical Resources page for Heat Shrink guides."
Recommended Applications and Accessories
"Some locations and fittings require further environmental sealing to a higher IP standard. Examples include soils or garden beds that retain moisture with poor drainage and areas of high condensation or pooling of water.
Joins are soldered and adhesive lined end caps are used as per the Standard Join, then an additional layer of adhesive lined tube is added to encapsulate all moisture entry points including air spaces between the inner and outer cable cores.
Always refer to individual product specific Installation Sheet. Refer to the General Technical Guides section on Technical Resources page for Heat Shrink and Joining Methods guides."
Joins are soldered and adhesive lined end caps are used as per the Standard Join, then an additional layer of adhesive lined tube is added to encapsulate all moisture entry points including air spaces between the inner and outer cable cores.
Always refer to individual product specific Installation Sheet. Refer to the General Technical Guides section on Technical Resources page for Heat Shrink and Joining Methods guides."